Injection Extruder Auxiliary Equipment Chilled Water Chiller
- Normally 20hp 15tr Auxiliary Equipment Chiller , widely used for plastic injection, extruding machine.
- Outlet temperature range: +5~+35 degree C
- Water flow: 9.48m3/h
- Water tank: 350L
- Pump power: 1.5kw
- Different cooling capacity customized.
- OEM service.
Technical Data:
| Chiller Model | | MG-20C(D) |
| Cooling efficiency of 15 tr chiller | kW | 55.3 * |
| Voltage of chiller unit | voltage | 220/380/415/440/480 |
| Frequency of air cooling chiller | Hz | 50/60 |
| Refrigeration compressor | Power (kW) | 18.1 |
| Air cooled chiller condenser | | Finned copper tubes |
| 15 ton chiller evaporator | Type | Shell and tube |
| Tank with coils |
| Cooling water flow | m3/h | 9.48 |
| Chiler water pump | Life (m) | 20 |
| Pump power | Kw | 1.5 |
| Dimension | mm | 2100*1000*1700 |
| Weight | Kg | 850 |
- Auxiliary Equipment Chiller -
-Construction of Auxiliary Equipment Chiller -
1.Compressor
| Refrigeration compressor Copeland/Panasonic/Danfoss - Power supply:3phase, 220v/380/415/440v/50, 60hz
R407c, R22, R410a |  |
2. Condenser
 | Air cooling condensing unit - To incerase the condenser heat exchanger area
|
3. Evaporator type
| And for the copper thickness, we adopt the 1mm but almost other supplier just use 0.6mm, you know the thickness of copper will influence the working life of chiller. If the 15 ton chiller user side is a sealed circulate water system, we suggest you choose this type, so that can ensure the water pressure balance. |
 |  |
 | If user site is a open type circulate water system, or distributor can not sure user site with which type, we suggest you choose this evaporator. |
4. Controller
- Mirco-computer control system
- Controller function--- we adopt microcomputer control system from PUNP
brand, the Top 1 controller supplier in our line. - Remote control: we will reserve a terminal in advance, if need this function then
connect a switch and alarm , so that you can control the chiller stop, running, and
alarm if any running problem of chiller at office. |
 | 
|
- Auxiliary Equipment Chiller widely used in industries-
Acid cooling, bakeries, beverage, blow molding, breweries, cement cooling, chemical process, concrete cooling, dairy milk, extrusion molding, fermentating, HVAC, injection molding, laminating, molding, oil cooling pharmaceutical, printing, poultry, plastics, swimming pool, etc.
-Packing&shipping-
The air cooled chiller will use the bubble glue at first, then the shockproof cotton, then the plastic film to protect the machine. Then add the wooden packing. The wood packing is the woodiness plywood + the solid wood.
|
|
Injection Extruder Auxiliary Equipment Chilled Water Chiller Images
|
